Ice Cream Cone Vacuum Form Molds
Ice Cream Cone Vacuum Form Molds
All molds have been tested live for you to see.
Note: We are currently using HIPS until PETG becomes available. Currently, with Covid, all PETG is being used to make face shields for essential workers. When it becomes available again, we will change back to PETG. It is the same thickness as the PETG, is also food friendly, fully recyclable and has a higher resistance to heat than PETG.
Molds are made of food friendly PETG material that is recyclable. Just fill mold and release. There are several techniques to removing these. Please watch live demo videos for more details.
Please note that temps higher than 180 degrees could cause the molds to deform. Prolonged exposure to sunlight could cause stress cracking to occur. Please note that these molds are made of a flexible plastic. Scratching can occur. Please use non-abrasive cleaners. Do not clean in dishwasher, please hand wash.
To make the details appear, please pack in the details before filling the rest of the mold.
We do not accept returns. If you have any issues with your order, please contact us.
We do not offer refunds. If a product was faulty or broken/damaged in shipping, please contact us and we will immediately ship you a replacement product.
We understand that sometimes an item may not work for you, however, we cannot refund these items. Once a product has been used, we can no longer re-sell it, we would have to throw away a returned product.
In order to receive a replacement of your damaged product, we need a picture from you of the damaged box from the carrier as well as a picture of the damaged product.
If you are requesting a replacement for a defective item, a picture of the defective item as well as a detailed description of the defect is required.
Shipping & Returns
Shipping & Returns
Where are you located?
We are in Calgary, AB Canada in a shop located at 122, 10615 - 48 Street SE Calgary, AB Canada T2C 2B7
Pick-up is available for residents. Please choose pick-up as your option and we will make pick-up arrangements with you via messaging or email once your order is ready.
Monday to Friday ~ 10am - 4pm
Contact us: via messenger, Email: firstname.lastname@example.org or Phone: 587-350-5830
- All Canadian packages will have tracking information provided to you upon shipping. You will receive a notification via email or SMS depending on your account options.
- For packages shipped outside of Canada, to the USA or International, please ensure you select tracking / insurance at check out. If you do not select the tracking option, are not insured if they are lost. We will only replace packages that have tracking & insurance on the packages.
- Selecting faster shipping options does not mean that you will jump the printing queue, it will only mean that once your package is shipped, it will reach you faster. To jump the printing queue, please select Rush Processing on the website.
- Custom import and taxes are the responsibility of the purchaser. We are not responsible for any custom delays.
- Once a package leaves our facility, we have no control over it's movement.
- We are NOT responsible for packages that are stolen by porch pirates. We will file a claim with Canada Post on your behalf but we will not re-ship your order.
- We reserve the right to send a customer an invoice for additional shipping costs if the order is multiple boxes or overweight.
In stock items are packaged and shipped within 72h, unless a national Holiday is within that time then it can take an extra day.
Can I combine orders?
Possibly, if your order was placed a while ago contact BTM with your name (as written in your account) and the order number to confirm it is not about to ship. If your order is recent, like during a multi day sale, no need to contact us first just follow these steps: 1-Please add the combine option to your cart. 2-In the comments state which order number, it should be combined with. 3-At checkout select pick-up.
If I combine orders do I need to pay shipping again?
No, select pick-up at checkout as to not be charged for shipping. However, if the combined shipping cost is more than what was paid the surplus will be invoiced. Please make sure to have added the combine option to your cart as well as indicate in the comments which order it must be combined with.What are your payment options?
We accept credit cards (Visa, Mastercard, and American Express) through Shopify Payments. We also accept PayPal, Apple Pay, Google Pay, Shopify Pay, and Sezzle (4 interest free payments). As well as Email Money Transfer
How do I use a gift card and a discount code?
Contact BTM so that we may assist you.
Can I use my HBBG discount or redeem points during a sale?
No, the set-up on our website does not allow multiple discounts to be applied.
Can I redeem points or use my HBBG discount on pre-buys and subscription box?
No, these are already highly discounted, and we can afford a further discount on these products. If one is used it will be canceled and an invoice will be sent to you.
How do I redeem points?
Log into your account. Press the Rewards icon at the bottom right of the screen. Press the redeem icon next to the reward you want to redeem. If no redeem icon is next to the reward, you have not yet accumulated enough points to redeem it. After pressing the redeem icon, a code will appear as well as an option to copy this code. An email will also be sent to the email registered in your account with the discount code. Then to use the discount code, proceed with checkout as usual but at payment enter the code where it says, “Gift car or discount code”.
What are your molds made of & why are they so strong?
100% Just pop us a message and we will work with you to create your design. Custom molds are defined as molds of a logo or a design too specific for mass sale. Custom molds require you to pay for the design fee, the mold and if necessary, shipping. For a standard size Hand Molds, the cost is 80$. For a standard size Hybrid mold, the cost is 65$. For a standard size vacuum mold, the cost is 35$.
If you have an idea for a mold but it is not your logo or too specific for mass sale, message us and we will work with you to create your design. As we will add this mold to our catalogue we will wave the design fee, you will be charged for the mold and shipping, if needed.
To use: Place the bottom plate inside the sleeve of the mold. Add your bath bomb mixture. We recommend weighing it so you can make the same size bomb each time. Place the top plate on top, and then simply press down hard. Tap all around your mold. You can either push the top and bottom piece out of the sleeve by hand, and then unmolds, or you can use the plunger to push the pieces out. Wipe away any mixture on the inside of the pieces before making the next bath bomb.
How do you use a vacuum mold?
To use: Add a little mix at the bottom of the mold then press into the details. Lightly fill with mix, create a fluffy mountain, and press it into the mold. Using a solid tool with a straight edge like a soap cutter, butter knife or whatever you have on hand, scrape the mold so the back is completely flat and leveled. Turn or smack the mold unto your unmolding space, massage the mold and lightly pull on the corners of the mold to help break the suction. Lift the mold off, if difficult tap the mold while lifting.
How do you use a hybrid mold?
To use: Add a little mix at the bottom of the mold then press into the details. Lightly fill with mix, create a fluffy mountain, and press it into the mold. Using a solid tool with a straight edge like a soap cutter, butter knife or whatever you have on hand, scrape the mold so the back is completely flat and leveled. Turn or smack the mold unto your unmolding space, tap the sides and bottom of the mold to help break the suction. Lift the mold off, if difficult tap the mold while lifting.
Do you have videos showing how to use these molds?
We have a Facebook help group with videos of nearly every mold being used. Join us by answering all 3 questions: https://www.facebook.com/groups/283611055546721/ If you can’t find the video that you need message us or ask on the group.